Waterproof paint leak-proof coating Aquaproof PRO Pail 20 Kg

AQUAPROOF PRO is a waterproof coating formulated with innovative polyurethane acrylic for horizontal and vertical structures, suitable for interior and exterior use. Applicable on various surfaces such as metal, concrete, brick walls, GRC, gypsum, etc. It has good waterponding resistance, ideal for concrete slabs.

Application Preparation:

1. Ensure concrete/cement surfaces are clean, free of dirt, rust, grease, mold, and small particles. Clean mold with fungicide, scrub, and rinse thoroughly.

2. Rusty metal must be cleaned and protected with high-quality anti-corrosion coating.

3. For hairline cracks, apply Aquaproof Pro directly. For wider cracks, mix Aquaproof Pro with fine sand (max 30 mesh) in a 1:1 volume ratio.

4. Use Aquaproof Polyester Mesh or Super Mesh on wide cracks or high traffic areas. Install mesh on the first wet Aquaproof Pro layer, then apply the second layer.

Usage:

• Brush/Roller: Apply evenly according to recommended dosage. Allow touch dry before next coat. Use fine-haired roller recommended.

• Spray: Suitable for spray application.

Coverage:

• Waterproof coating: 1 kg/m²

• Decorative paint: 1 kg/4 m²

Technical Data:

• Specific Gravity: 1.2 ± 0.05 g/mL

• Viscosity: 19,000 – 25,000 cPs

• Tensile Strength (ASTM D412): >2 mPa

• No thinning required

• Touch Dry Time: ± 30-60 minutes (depending on temperature & humidity)